PRIMO PM-081-P Normal open end cutting machine with robot arm
Summary : This cutting machine is with touch screen and labour hand which will pull the zipper out for cutting quickly so that big fancy pullers will not get stuck.
Product Name: Normal open end cutting machine with robot arm
Model number : PM-081-P
Summary : This cutting machine is with touch screen and labour hand which will pull the zipper out for cutting quickly so that big fancy pullers will not get stuck.
Advantages:
1-This cutting machine is with touch sreen and labour hand which will pull the zipper out for cutting quickly so that big fancy pullers will not get stuck. As a result, this machine is suitable for zippers with fancy pullers. If you only need to Cut zippers with normal puller, we do not advice you to buy cutting machine with machanical hand of which the output will be reduced at least 1/3 than normal cutting machine.
2- Same size of nylon zipper, metal zipper, plastic zipper which with "T" type hole punching mould can be cut by the same machine. But zippers with butterfly 6 holes "T" type hole punching mould , straight hole punching mould and other Type of hole punching moulds should use separate machine. Only 3# and 5# zippers can be cut by the same machine, other size zippers should be cut by different machine.
If you have any enquiny about quotation or cooperation,please feel free to emal us at [email protected] or use the folowing enuiry form.
Our sales representative will contact you within 24 hours. Thank you for your interest in our products
Abstract : This cutting machine is with touch sreen. It uses ultrasonic cutting to avoid easy loose edge problem of zippers, improve the strength and with low noise.
View More
Advantages: 1) This machine is easy to be operated and with good stability. 2) Different sizes or different materials zippers can be common used on same machine by changing the mould.
View More
Advantages: 1) This machine is easy to be operated and with good stability. 2) Different sizes or different materials zippers can be common used on same machine by changing the mould.
View More
Remarks: 1) This machine is with touch screen. The speed can be adjusted freely and the faults are shown on the screen which helps to guide technicians to solve the fault faster and more efficiently. 2) Different with old model machine, this machine is with fixed welding head and the film is cut by cutter holder. If the film can't be cut, it only needs to change the cutter and no need to change the welding head.
View More